v1.10 (07/11/2021)
- Improved engine texture
- Added glitter paint
- Added rainy paint (not working yet) v1.11 (07/12/2021)
- Thanks to Revolution Racecraft for allowing me to use the changes from an old project from him!
- Added High Offset disc brakes
- Added High Offset suspensions
- Added Liberty Walk suspensions
- Added Liberty Walk fenders
- Added Libery Walk bumpers
- Added tubular rear support
- Added rear race differential (broken for now)
- Added 3 new exhaust variants
- Added twin turbo intake
- Added 2 new spoilers
- Added ultra light flywheel
- Added race awd transfer case
- Remade engine 3D model
- These changes were made by me
- Added Liberty Walk config
- Added Twin Turbo config
- Engine can now be teared off the car
- Exhaust can now be teared off the car and will work dynamically
- Added custom engine sound for the twin turbo
- Added compact front chassis
- Remade engine textures
- Improved textures performances
- Improved race config
- Reduced backfire on stock intake
- Fixed license plates showing my nickname
- Fixed (maybe) the hood jbeam
- Fixed Nomi GTRX Wing spoiler
- Fixed ECU max rpm being too high
- Fixed small jbeam issues here and here
- Made a Github project for the mod
v1.12 (08/01/2021)
- Fixed hood camera
- Fixed all engines horsepower
- Fixed aerodynamic
- Fixed windshield JBeam
- Fixed steering wheel on SL version
- Fixed exhaust issues
- All spoilers now have JBeam and can fall off the car
- Fixed tire thickness for all tires
- Fixed glitter paint issues
- Greatly improved 3D model overall
- Fixed issues on the 3D model
- Retextured the trunk
- Reduced the backfire volume a bit
- Fixed the backfire being way too high on normal variant (my bad I mistyped in the file)
- Reduced backfire amount on the bi-turbo variant
v1.13 - 1.13.2 (08/02/2021)
- Thanks to Subin for the twin turbo 3D model
- Changed the twin turbo model for a better one
- Improved the steering wheel support 3d model (key hole etc)
- Added a new spoiler for the new twin turbo 3d model
- Added a new exhaust for the new twin turbo 3d model
- Improved JBeam (fix spikes on the hood)
- Fixed front race differential
- Fixed steering wheel centering
- [1.13.1] Fixed materials issues with the twin turbo spoiler
- [1.13.1] Fixed a gap on the twin turbo spoiler
- [1.13.2] Slightly increased the backfire volume (but still lower than original)
v1.14 - 1.14.1 (08/05/2021)
- New engine start sound
- Added two new transmissions (race manual and race sequential)
- Very slightly improved engine sound
v1.15 - 1.15.3 (08/09/2021)
- Fixed shading issues with the paint (it looks smoother now)
- Fixed Polizia skin
- Fixed bicolore skin
- Partially fixed tricolore skin
- All skins are now 4k resolution instead of 1k (the ones which were fixed)
- [1.15.1] Fixed fuel needle being inverted
- [1.15.2] Fixed the back grills and a minor shading issue
- [1.15.3] Fixed after fire sound
v1.16 (08/18/2021)
- Thanks to Danyk10 and default0.0player for the new transmission
- Remade gallardo single clutch transmission
- Improved twin turbo sound
- Changed the race variant transmission to sequential
- Added ultrarace variant
v1.17 (08/24/2021)
- Fixed invisible shifter for some gearboxes
- Fixed the spoiler shaking issue
- Added ultrarace config
- Improved twin turbo engine sound
v1.18 - 1.18.1 (08/31/2021)
- Fixed doors glass breaking sound
- Fixed hood shaking
- Fixed rear bumper shaking
- Fixed oil pan being too weak
- Fixed the headlights
- Improved the hood JBeam a bit
- Improved twin turbo engine sound
- Reduced starter volume a bit
- [1.18.1] Fixed hood not detachable anymore
- [1.18.2] Renamed the transmission controller
v1.19 (09/12/2021)
- Improved front bumper JBeam
- Improved rear bumper JBeam
- Improved fenders JBeam
- Improved hood JBeam
- Fixed front bumper clipping through the body too easily
- Fixed Valentino Balboni skin
- Fixed Tricolore skin
- Fixed hood spiking
v1.20 (09/12/2021)
- Removed 53 192 useless vertices
- Fixed multiple 3D model issues
- Fixed door shading
- Fixed tailgate shading
- Fixed front bumper shakiness (still present but less)
- Improved front bumper JBeam
v1.21 - 1.21.3 (09/15/2021)
Thanks to DJS for the suspensions 3D model
- Added 3D model for front and back coilovers, sway bars, differentials, lower arms, upper arms, hubs, halfshafts and pushrods
- Added chassis 3D model
- Added roll cage
- Race and ultrarace variant now have a roll cage
- Remade the trunk 3d model
- Improved 3D model overall
- Fixed shading issues
- [1.21.1] Fixed bottom chassis glitching with the body
- [1.21.2] Improved twin turbo hiss / bov sound
- [1.21.3] Improved twin turbo hiss / bov sound again
- [1.21.4] Improved twin turbo sound again again
- [1.21.4] Improved bottom chassis visual
v1.22 - 1.22.1 (10/06/2021)
- Improved engine sound
- Fixed front bumper shading
- [1.22.1] Improved wheel color
- [1.22.2] Improved backfire sound
v1.23 - 1.23.1 (10/14/2021)
- Thanks to Nejc for the parts!
- Fixed roll cage going into race seats
- Changed roll cage for a better looking one
- Added race rear bumper
- Added race hood
- Added vented hood
- Added race tailgate
- Added race addons
- Added roof vent
- Added big and small roof antenna
- Change Liberty Walk, Race and Ultrarace configurations accordingly
- [1.23.1] Fixed a upper casing